top of page

Unconventional Training Club

Public·12 members
Ľudovít Leško
Ľudovít Leško

Adjustment Program Epson L210 65


How to Reset Epson L210 Printer with Adjustment Program




If you own an Epson L210 printer, you may encounter some problems that prevent you from printing normally. For example, you may see a message like "The printer's ink pads are nearing the end of their service life" or "A printer's ink pad is at the end of its service life. Please contact Epson Support" on your computer screen. These messages indicate that your printer's waste ink pads are full and need to be replaced or reset. In this article, we will show you how to reset your Epson L210 printer with an adjustment program, which is a software tool that can reset the waste ink counter of your printer.


What is an adjustment program?




An adjustment program is a software tool that can modify some settings of your Epson printer, such as resetting the waste ink counter, cleaning the print head, checking the ink level, and so on. You can download an adjustment program for your Epson L210 printer from various sources on the internet, such as [this one]. However, be careful when downloading and using an adjustment program, as some of them may contain viruses or malware that can harm your computer or printer. Always scan the downloaded file with an antivirus program before running it.




adjustment program epson l210 65


Download: https://www.google.com/url?q=https%3A%2F%2Ft.co%2FR7sBSIXddG&sa=D&sntz=1&usg=AOvVaw0xE5udoZsQ8EoYqlYU9K0u



How to use an adjustment program to reset your Epson L210 printer?




Before you use an adjustment program to reset your Epson L210 printer, make sure that your printer is connected to your computer via a USB cable and turned on. Also, make sure that you have installed the driver for your printer on your computer. Then, follow these steps:



  • Download the adjustment program for your Epson L210 printer from [this link] or any other reliable source.



  • Extract the downloaded file to a folder on your computer.



  • Run the Adjprogcracked.exe file from the extracted folder.



  • Click the Select button on the main window of the adjustment program.



  • Select L210 as the Model Name and Auto selection as the Port. Then, click OK.



  • Click Particular adjustment mode on the next window.



  • Select Waste ink pad counter under Maintenance and click OK.



  • Check the Main pad counter box and click Check. You will see the current value of the waste ink counter.



  • Click Initialization to reset the waste ink counter to zero. You will see a message asking you to turn off your printer. Click OK and turn off your printer.



  • Turn on your printer again and click Finish. Your printer has been reset successfully.




You can watch [this video] or [this video] for a visual demonstration of how to use an adjustment program to reset your Epson L210 printer.


Conclusion




In this article, we have explained what an adjustment program is and how to use it to reset your Epson L210 printer. By resetting your printer's waste ink counter, you can avoid replacing the waste ink pads or contacting Epson support. However, resetting your printer does not solve the problem of waste ink accumulation in the pads. You should periodically clean or replace the waste ink pads to prevent ink leakage or damage to your printer. You can also use alternative methods to reset your printer, such as using a reset key or a chip resetter. We hope this article has been helpful for you. If you have any questions or comments, please leave them below.


About

Welcome to the group! You can connect with other members, ge...
bottom of page